getOperationWarnings

getOperationWarnings(well, today?): OperationWarning

Returns the validation warnings of the meters, production and operating_regime blocks, of the v2.3 history_logs categories and of aquifer_analysis references (.well v2.3) and of logger_series events (.well v2.4). Warnings never make a file invalid. today (local calendar date) selects the active permit and the regime in force for regime_exceeds_permit.

Meters:

• meter_removed_before_installed — removed_at not after installed_at. ids: meter.
• overlapping_meters — two installation windows overlap (open = until infinity; touching is fine). ids: meter, meter.
• duplicate_meter_id — ids: meter id.

Production (effective entries only, except for ids and corrects):

• reading_meter_unresolved — ids: production, meter_id.
• reading_outside_installation — reading before installed_at or after removed_at (equal is fine). ids: production, meter.
• reading_rollover_unknown — r₂ < r₁ without max_reading. ids: r₁ production, r₂ production, meter.
• duplicate_production_id — ids: production id.
• corrects_unresolved — corrects points to no entry. ids: production.
• corrects_cycle — the corrects chain loops back. ids: production, once per entry in the cycle.
• estimate_period_invalid — an estimated_volume whose period_end is not after period_start, or an unparseable instant. ids: production.
• estimated_overlaps_meter — an estimated_volume overlapping a meter interval; the meter wins. ids: production.

Operating regime:

• duplicate_regime_id — ids: regime id.
• regime_duplicate_effective_from — same instant. ids: every regime sharing it.
• daily_operating_time_normalized — a regime daily_operating_time above 24, read as 24 (v2.4). ids: regime.
• regime_exceeds_permit — the regime in force on today (latest whose effective_from local date is on or before today) has flow_rate or daily_operating_time above an active / active_pending_renewal permit. ids: regime, permit.

History logs (ids: log):

• log_category_field_mismatch — maintenance fields on a non-maintenance entry, status on a non-status_change. hydrodynamic_event_ids and sample_ids are valid on every category.
• log_reference_unresolved — pump_installation_id, meter_id, or an id in hydrodynamic_event_ids / sample_ids that does not resolve.
• log_after_decommission — while the current status is decommissioned or abandoned, a non-status_change entry dated after the start of that closed run (the earliest closing entry not followed by a reopening one).
• missing_maintenance_type — a structured maintenance entry (with pump_installation_id or meter_id) without maintenance_type. Legacy maintenance entries without references are fine.
• missing_status — a status_change entry without status.

Aquifer analysis:

• analysis_uses_retracted_event — source_event_ids or static_level_source_id points to a retracted event. ids: analysis, event.
• analysis_uses_logger_series — source_event_ids or static_level_source_id points to an effective logger_series, which is not a valid analysis source (v2.4). ids: analysis, event.

Logger series (effective events only, v2.4):

• logger_reading_below_sensor — a reading whose depth is greater than sensor_depth (the level is below the sensor, so the reading is invalid). Once per event. ids: event.

Parameters

well

Well

today?

string = ...

Returns

OperationWarning